Print Page Content Create PDF from Page Content Email and Share Page Content

Manufacturer Warranties

  Select Warranty information below, Hover and Click over a Manufacturer for the information to appear:


ADAMS RITE

Products sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service.

This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Adams Rite products or parts. This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification.

Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below.
  ? All mechanical products for five (5) years from date of manufacture
  ? Ultraline 7400 Electric Strikes for five (5) years from date of manufacture
  ? All electrical products for three (3) years from date of manufacture, with the exception of the exit  devices with the SE option
  ? Exit devices with the SE option for one (1) year from date of manufacture. Adams Rite recommends that for optimal performance all exit devices with the SE option are installed and powered using PS-SE power supplies. Installing SE exit devices with PS-SE power supplies extends the warranty to five (5) years from date of manufacture. 

General RMA Procedure
Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, Adams Rite will determine whether products qualify for repair or replacement under this warranty. Adams Rite has no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done.

Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, 10027 S. 51st Street, Suite 102, Phoenix, Arizona 85044 or CustomerCare@AssaAbloyEMS.com and should include your name and address, an identification of the product or component part and a brief description of the defect. Notice of a product or component part believed to be defective as covered by this warranty may also be accepted over the telephone by Adams Rite, 800.872.3267.

Upon receipt of such notice, if the customer has an account with Adams Rite or a valid credit card, an advance replacement product may be ordered whereby Adams Rite will ship a replacement product to the customer free of charge. If Adams Rite does not receive the original defective product from the customer within 60 days, Adams Rite will charge the customer?s account or credit card for the price of the advanced replacement product plus freight costs. Upon inspection of the returned product by Adams Rite, a decision will be made whether or not to charge the customer for the advanced replacement Adams Rite product. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Obsolete products will not be accepted for return. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance.

If Adams Rite receives original defective product from the customer within 60 days of RMA issuance, and if the customer is requesting credit for the defective material, the customer must reference the valid Adams Rite Purchase Order number upon which the product was originally ordered. If the original Purchase Order number is not available, at Adams Rite?s option a credit may be issued at the customer?s current cost. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms.

Transportation charges and insurance on all returned materials must be prepaid by the purchaser when merchandise is ordered in error. On goods returned for customer convenience, when the purchaser returns materials in compliance with these Terms which are accepted by Adams Rite, the purchaser may be issued a credit for 65% of the purchase price, with 35% charged by Adams Rite for handling and reprocessing. All refunds will be in the form of a credit.

Cancellation
As an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. Adams Rite?s proud history of customer service and manufacturing agility allow quick response times to customer?s changing needs, which may include special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer?s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite?s option, product modifications and other special orders cannot be changed, cancelled, or returned once a ship date has been provided on an order acknowledgement by Adams Rite.

Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

ALARM LOCK

ALARM LOCK SYSTEMS, INC. (ALARM LOCK) warrants its products to be free from manufacturing defects in materials and workmanship for twenty four months following the date of manufacture. ALARM LOCK will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user.

This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, improperly installed, improperly used, abused, altered, damaged, subjected to acts of God, or on which any serial numbers have been altered, defaced or removed. Seller will not be responsible for any dismantling or reinstallation charges, environmental wear and tear, normal maintenance expenses, or shipping and freight expenses required to return products to ALARM LOCK. Additionally, this warranty shall not cover scratches, abrasions or deterioration due to the use of paints, solvents or other chemicals. THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF ALARM LOCK.

Any action for breach of warranty, including but not limited to any implied warranty of merchantability, must be brought within the six months following the end of the warranty period. IN NO CASE SHALL ALARM LOCK BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT.

In case of defect, contact the security professional who installed and maintains your security system. In order to exercise the warranty, the product must be returned by the security professional, shipping costs prepaid and insured to ALARM LOCK. After repair or replacement, ALARM LOCK assumes the cost of returning products under warranty. ALARM LOCK shall have no obligation under this warranty, or otherwise, if the product has been repaired by others, improperly installed, improperly used, abused, altered, damaged, subjected to accident, nuisance, flood, fire or acts of God, or on which any serial numbers have been altered, defaced or removed. ALARM LOCK will not be responsible for any dismantling, reassembly or reinstallation charges, environmental wear and tear, normal maintenance expenses, or shipping and freight expenses required to return products to ALARM LOCK. Additionally, this warranty shall not cover scratches, abrasions or deterioration due to the use of paints, solvents or other chemicals.

This warranty contains the entire warranty. It is the sole warranty and any prior agreements or representations, whether oral or written, are either merged herein or are expressly cancelled. ALARM LOCK neither assumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or to assume for it, any other warranty or liability concerning its products. In no event shall ALARM LOCK be liable for an amount in excess of ALARM LOCK's original selling price of the product, for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of any failure of the product. Seller's warranty, as hereinabove set forth, shall not be enlarged, diminished or affected by and no obligation or liability shall arise or grow out of Seller's rendering of technical advice or service in connection with Buyer's order of the goods furnished hereunder. ALARM LOCK RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY.

Warning: Despite frequent testing, and due to, but not limited to, any or all of the following; criminal tampering, electrical or communications disruption, it is possible for the system to fail to perform as expected. ALARM LOCK does not represent that the product/system may not be compromised or circumvented; or that the product or system will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; nor that the product or system will in all cases provide adequate warning or protection. A properly installed and maintained alarm may only reduce risk of burglary, robbery, fire or otherwise but it is not insurance or a guarantee that these events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should in turn advise the consumer to take any and all precautions for his or her safety including, but not limited to, fleeing the premises and calling police or fire department, in order to mitigate the possibilities of harm and/or damage.

ALARM LOCK is not an insurer of either the property or safety of the user's family or employees, and limits its liability for any loss or damage including incidental or consequential damages to ALARM LOCK's original selling price of the product regardless of the cause of such loss or damage. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, or differentiate in their treatment of limitations of liability for ordinary or gross negligence, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

AMSEC

Limited Product Warranty LIMITED WARRANTY?SECURITY SAFES & ELECTRONIC PRODUCTS Product Category . . . . . . . . . . . . . . . . . . . . . . . . . Duration of Warranty (Beginning from date of first consumer purchase / Proof of purchase necessary) All Safes and related components (Excludes Cash Wizard) . . . . . 1 Year Parts & Labor Factory Installed Electronic Locks and related components . . . 1 Year Parts & Labor Electronic Lock Retrofit Kits and related components . . . . . . . . . 1 Year Parts CashWizard Safes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 days labor and 1 year parts Special Extended Residential Warranty / Product Category (See special coverage guidelines enclosed for each product category) U.L. Listed Fire Safes (BF, UL and FS) . . . . . . . . Lifetime Free Replacement due to fire Super Brute Floor Safes . . . . . . . . . . . . . . . . . . . . Lifetime Free Replacement due to forcible entry Gun Safes (55? and Taller) . . . . . . . . . . . . . . . . . . Lifetime Free Replacement due to fire or forcible entry What is covered and what is not covered:

This warranty covers all defects in materials or workmanship in this product, but DOES NOT COVER: (1) Damage, deterioration or malfunction resulting from: a. Accident, negligence, misuse, abuse, improper installation, failure to perform normal maintenance or operation to follow instructions labeled on or provided in the safe. b. Any damage occurred from shipment. (Claims must be presented to the carrier) c. Repair or attempted repair by anyone other than a pre-authorized AMSEC service dealer. (2) Any unit which has been altered or on which the serial number has been defaced, modified or removed. (3) Normal wear, battery replacement, any periodic maintenance or where combination lock has been changed without factory authorization. Who may enforce the warranty: This warranty is only enforceable by the original purchaser.

What we will pay for and what you must pay for: AMSEC will repair or replace units covered by this warranty, without charge to the consumer for labor and materials. YOU ARE RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY SHIPPING CHARGES. State sales tax does not apply to warranty service work and will not be honored. If safe components must be shipped for warranty service, AMSEC will pay the shipping charges to any destination within the USA if the repairs are covered by the warranty. Defective parts must be returned (not repaired unless instructed) to AMSEC. If parts are not returned, the warranty invoice will be denied.

How you can get warranty service: (1) If your AMSEC safe requires service, contact your local authorized AMSEC dealer and the dealer will advise you of the procedures to be followed. If this is not practical, contact the AMSEC Service Department at the address on front cover or call 951-685-9680, ex. #1036.

(2) All warranty service must have prior authorization, accompanied by proof of purchase as evidence of warranty coverage. A warranty authorization number must be obtained from AMSEC before any service work is performed. The serial number, description of product and description of problem must be supplied to AMSEC to determine warranty status before an authorization number will be assigned. Issuance of the authorization number recognizes only the existence of the problem and does not constitute an admission of liability by AMSEC. Only approved service representatives will be authorized to perform warranty service. Any service performed prior to issuance of a warranty authorization number will be subject to denial.

Limitation of Implied Warranties: Any implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.

Exclusions of Damages: AMSEC?s liability for any defective products is limited to repair or replacement of the product, at our option. AMSEC shall not be liable for damages based upon inconvenience, loss of use, damage or loss of contents, or any other damages whether incidental, consequential or otherwise.

BALDWIN

Mechanical Warranty: Baldwin Hardware warrants to the original residential purchaser (the ?Purchaser?) that each Baldwin Estate product shall be free of mechanical defect for as long as the Purchaser occupies the residential premises upon which the product was originally installed.

Finish Warranty: Limited Lifetime PVD Finish? Warranty: The Baldwin Lifetime finishes use advanced finishing technology (Physical Vapor Deposition) to create a finish highly resistant to the effects of weather and normal wear and tear. For Baldwin products purchased with Lifetime or PVD finishes, Baldwin warrants the finish shall be free from defects in material and workmanship from tarnishing, flaking, pitting, and discoloring for the lifetime of the applicable product as long as the original Purchaser occupies the residential premises upon which the product was originally installed.

Limited Finish Warranty: The finish on Baldwin products (excluding Lifetime PVD Finish and living finish products) is protected by a durable topcoat designed to maintain the beauty and quality of the Baldwin product. For Baldwin products purchased with a Limited Finish Warranty, Baldwin warrants the finish shall be free from defects in material and workmanship from tarnishing, flaking, and discoloring for either a) five (5) years from date of purchase for interior use or b) one (1) year from the date of purchase for exterior use; as long as the original Purchaser occupies the residential premises upon which the product was originally installed.

Living Finishes: Atmospheric conditions can cause staining and alkaline etching that varies by geography. In addition, frequency of use will cause the finish to gracefully age in appearance. These finish changes are not considered manufacturing defects and are not covered by this warranty. Rather, they are indicative of normal wear and tear and reflect the essence of a living finish. Due to the nature of Baldwin living finish products, they will wear over time and may already have begun the process before reaching your home. No finish warranty is offered on Baldwin living finish products, which are designed to age and improve over time. Living finishes include raw brass, oil rubbed bronze, stainless steel, and other non-lacquered or non-PVD finishes.

BEST

What is Covered: Stanley Security Solutions, Inc. (?Stanley?) warrants that the Products manufactured by Stanley, identified below, and sold under its trade names ?BEST? and ?SHELTER? are free of defects in materials and workmanship as outlined below. The sole and exclusive liability of Stanley under this warranty is limited to the repair or replacement of any Product or component part covered by the warranty at the sole discretion of Stanley. Who is Covered: This warranty is extended only to the Seller?s distributors of Products and the end user who purchases Products for purposes other than resale (collectively, ?Purchaser?).

Hardware Warranty Period: The following products shall be warranted for three (3) years from the date of sale: ? 9KX Electro-mechanical Cylindrical Lock The following products shall be warranted for one (1) year from the date of sale: ? Shelter Gateway and Gateway Accessories, Shelter Repeaters and Repeater Accessories, Shelter FOBs Finishes shall be warranted for three (3) years from the date of sale excluding US10B/613 ?Oil Rubbed Bronze? finish. Warranty Claims: Any Products believed to be defective as covered by this warranty may not be returned without prior written Returned Materials Authorization (RMA) from Stanley Product Support (800) 392-5209 covering specific items and quantities within thirty (30) days from the discovery of the alleged defect(s). Stanley will inform the purchaser where to ship said Product(s), shipping charges prepaid by you, for examination. In the event such examination reveals a defect covered by this warranty; Stanley will, at its sole option, repair or replace the Product, and return it or its replacement to the purchaser, with charges only for shipping.

Exclusions: This warranty specifically excludes, and Stanley shall not be held responsible for the following: a) COSTS ASSOCIATED WITH INSTALLING, REMOVING OR REINSTALLATION OF THE PRODUCT. b) Damage caused by Product malfunction or failure attributable to acts of God. c) Improper use or installation. d) Poor or no maintenance or routine testing. e) Work performed by someone other than an Authorized Stanley technician. f) Failure to follow Stanley?s operating instructions, quick use guide, or environmental specifications. g) Incorrect application, modification, vandalism, erosion or corrosion, shipping and/or handling, improper storage, accident, misuse, abuse or any other cause not within the control of Stanley. h) This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk and expense of the party making the modifications. i) Stanley shall not be liable for any repairs, replacements, or adjustments to the product or any costs of labor performed by the Purchaser or others without Stanley?s prior written approval. j) Stanley provides no warranty or guarantee that the Shelter 9KX Cylindrical Lock, Shelter FOB, Shelter Gateway or gateway accessories or Shelter repeaters or repeater accessories will function properly or be mechanically compatible with products not manufactured by Stanley, including any third party access control systems, third party monitoring systems, etc. k) The US10B/613 finish is considered to be a living finish that will change over time with use and age and is expressly excluded from this warranty. The finish changes that occur are indicative of normal wear and tear and reflect the essence of a living finish. The finish changes are not considered manufacturing defects and are not covered by this warranty. l) This warranty does not cover any post sales technical support under the following circumstances: a. Failure to provide a network connection if deemed necessary by Stanley b. Technical support for network configuration c. Technical support for software installed on computer hardware or computer operating system that is no longer commercially available for purchase. d. Technical support for unsupported internet browsers Third Party Warranty: Except as otherwise provided above, Stanley makes no warranty, express or implied, with regard to third party hardware or software and expressly disclaims the implied warranties or conditions of merchantability or merchantable quality, fitness for a particular purpose, title, infringement and those arising by statute or otherwise in law. Customer?s sole recourse for warranty claims is with the manufacturer of the Product. However, Stanley agrees to pass through any third party warranty that Stanley receives from the manufacturer of the Products to Purchaser. The extent of any third party warranty details, terms and conditions, remedies and procedures may be expressly stated on, or packaged with, or otherwise accompanying the Products. For the purpose of this Warranty, the Shelter System shall include the Shelter 9KX Cylindrical Lock, Shelter FOB, Shelter Gateway, Shelter Repeaters and any Shelter Repeater accessories.

LIMITATION OF WARRANTIES: THIS WARRANTY IS GIVEN EXPRESSLY AND IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO UNDERSTANDINGS, AGREEMENTS, REPRESENTATIONS, OR WARRANTIES NOT SPECIFIED HEREIN. STANLEY MAKES NO REPRESENTATIONS OR WARRANTIES THAT THE SHELTER SYSTEM MAY NOT BE COMPROMISED, OR THAT THE SHELTER SYSTEM WILL IN ALL CASES BE UNINTERRUPTED, TIMELY, SECURE OR ERROR FREE, OR PROVIDE THE PROTECTION FOR WHICH IT IS INTENDED.

LIMITATION OF LIABILITY THE SHELTER SYSTEM MAY BE USED TO ACCESS AND TRANSFER INFORMATION OVER THE INTERNET. STANLEY DOES NOT OPERATE OR CONTROL THE INTERNET AND EXPRESSLY DISCLAIMS ANY AND ALL LIABILITY ASSOCIATED WITH ANY OF THE FOLLOWING: (A) VIRUSES, WORMS, TROJAN HORSES, OR OTHER UNDESIRABLE DATA OR SOFTWARE; OR (B) UNAUTHORIZED USERS (E.G., HACKERS) OR ATTEMPTS TO OBTAIN ACCESS TO AND DAMAGE CUSTOMER?S DATA, WEBSITES, COMPUTERS, OR NETWORKS. STANLEY SHALL NOT BE RESPONSIBLE FOR SUCH ACTIVITIES. CUSTOMERS ARE SOLELY RESPONSIBLE FOR THE SECURITY AND INTEGRITY OF THEIR DATA AND SYSTEMS.

THE SHELTER SYSTEM IS A PRODUCT DESIGNED TO REDUCE THE RISK OF ENTRY INTO A LOCKED AREA. STANLEY SHALL NOT BE HELD LIABLE FOR LOSSES WHICH MAY OCCUR IN CASES OF MALFUNCTION OR NONFUNCTION OF ANY SHELTER PRODUCT, LOSSES RESULTING FROM FAILURE TO WARN OR INADEQUATE TRAINING; EVEN IF DUE TO STANLEY?S NEGLIGENCE OR FAILURE OF PERFORMANCE

STANLEY IS NOT AN INSURER. INSURANCE COVERING PERSONAL INJURY, PROPERTY LOSS, AND DAMAGE TO AND ON CUSTOMER'S PREMISES MUST BE OBTAINED AND/OR MAINTAINED BY CUSTOMER. CUSTOMER UNDERSTANDS THAT IT IS CUSTOMER?S DUTY TO PURCHASE SUCH INSURANCE. THE WARRANTY PROVIDED HEREIN SHALL CONFER NO RIGHTS ON THE PART OF ANY PERSON OR ENTITY THAT IS NOT A PARTY HERETO, WHETHER AS A THIRD-PARTY BENEFICIARY OR OTHERWISE. IT IS AGREED THAT IT IS IMPRACTICAL AND EXTREMELY DIFFICULT TO FIX ACTUAL DAMAGES WHICH MAY ARISE IN SITUATIONS WHERE THERE MAY BE A FAILURE OF THE SHELTER SYSTEM. THEREFORE, IF LIABILITY IS IMPOSED ON STANLEY, ITS EMPLOYEES, AGENTS OR REPRESENTATIVES, FOR PROPERTY DAMAGE OR PERSONAL INJURY, SUCH LIABILITY SHALL BE LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE OF THE PRODUCTS COVERED BY THIS WARRANTY OR $10,000 WHICHEVER IS LESS. THIS SUM SHALL BE PAID AND RECEIVED EITHER (I) AS LIQUIDATED DAMAGES AND NOT AS A PENALTY, OR (II) AS A LIMITATION OF LIABILITY APPROVED AND AGREED UPON BY THE PARTIES. THE PAYMENT OF THIS AMOUNT SHALL BE STANLEY?S SOLE AND EXCLUSIVE LIABILITY REGARDLESS OF WHETHER LOSS OR DAMAGE IS CAUSED BY THE PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS OF STANLEY UNDER THIS WARRANTY OR BY NEGLIGENCE, ACTIVE OR OTHERWISE, OF STANLEY, ITS EMPLOYEES, AGENTS OR REPRESENTATIVES.

NO SUIT OR ACTION SHALL BE BROUGHT AGAINST STANLEY MORE THAN ONE (1) YEAR AFTER THE ACCRUAL OF THE CAUSE OF ACTION ARISES. STANLEY SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, EXEMPLARY, SPECIAL OR PUNITIVE DAMAGES SUFFERED BY PURCHASER OR ANYONE CLAIMING BY, THROUGH OR UNDER PURCHASER, AS A RESULT OF THE CONDITION OF THIS PRODUCT, OR ANY PART OR PORTION THEREOF. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR STATE.

THIS WARRANTY IS GOVERNED BY THE LAW OF THE STATE OF INDIANA WITHOUT REGARD TO ITS CONFLICTS OF LAW PRINCIPLES. STANLEY AND PURCHASER AGREE THAT THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS SHALL NOT APPLY TO SALE OF THE PRODUCTS COVERED BY THIS WARRANTY. CUSTOMER RETAINS THE SOLE RESPONSIBILITY FOR THE LIFE AND SAFETY OF ALL PERSONS IN ITS PREMISES, AND FOR PROTECTING AGAINST LOSSES TO HIS/HER OWN PROPERTY OR THE PROPERTY OF OTHERS IN ITS PREMISES, CUSTOMER AGREES TO INDEMNIFY AND SAVE HARMLESS STANLEY, ITS EMPLOYEES, AGENTS, OR REPRESENTATIVES FROM AND AGAINST ALL CLAIMS, LAWSUITS, DAMAGES AND LOSSES, WHETHER IN CONTRACT LAW, TORT LAW (INCLUDING NEGLIGENCE, PRODUCT LIABILITY AND STRICT LIABILITY, OR ANY OTHER THERY OF LAW), IN ANY WAY RELATING TO THIS WARRANTY OR THE USE OR OWNERSHIP OF THE SHELTER SYSTEM, OR THE IMPROPER OPERATION OF THE SHELTER SYSTEM, WHETHER DUE TO MALFUNCTIONING OR NONFUNCTIONING OF THE SHELTER SYSTEM OR THE NEGLIGENT PERFORMANCE OR NONPERFORMANCE BY STANLEY, INCLUDING BUT NOT LIMITED TO PERSONAL INJURY OR PROPERTY DAMAGE.

STANLEY SHALL NOT BE LIABLE FOR ANY FINE OR PENALTY ASSESSED BY ANY MUNICIPALITY, FIRE, OR POLICE DEPARTMENT AS A RESULT OF ANY FALSE ALARM COMMUNICATED BY THE SHELTER SYSTEM. CUSTOMER SHALL BE RESPONSIBLE FOR CREDITING STANLEY THE FULL AMOUNT OF ANY SUCH FINE OR PENALTY THAT IS ASSESSED AGAINST STANLEY FOR SUCH FALSE ALARM ISSUED BY CUSTOMER.

SHELTER TERMS OF SALE & ASSUMPTIONS 1. COMPATIBILITY WITH OTHER SYSTEMS a. While the SHELTER network components, including the 9KX lock, Gateway, fob and repeater may be capable of being configured via input and output relays to allow the fob to initiate a signal to many third party access control system or alarm system, allowing communication with first responders, Stanley has not tested these systems and cannot guarantee the accuracy or performance of the Shelter components with third party products. Stanley recommends that you work with your third party integrator to determine compatibility and performance of the system. Stanley shall have no liability or obligation for additional products or services provided or delivered by a third party.

2. ACCESS CONTROL a. The Shelter System was not designed to serve as Customer?s overall electronic access control system to lock and unlock doors on a regular basis. Stanley shall not be held liable for Customer?s misuse of the Shelter System. 3. SHELTER SYSTEM BATTERY BACKUP: a. The Shelter system relies upon the gateway and repeater components to be hard wired to a power supply in order to receive a signal from the FOB and transmit signal to the 9KX or for the repeater relays to function properly. Therefore, it is strongly recommended that the gateway and repeater have a battery backup in place. In the event of a power loss at the gateway or repeater the Shelter system may not function properly.

SIGNAL: a. A FOB is typically capable of sending a signal up to 200 feet away to reach a gateway or repeater. b. A 9KX lock is typically capable of receiving a signal up to 400 feet away from a gateway or repeater. c. A repeater is typically capable of receiving a signal up to 400 feet away from a gateway. d. The distance of signal may vary depending upon building construction. Proper testing of all FOBs is recommended to ensure signals are being properly sent and received to the gateway and to understand the scope of where a lockdown can be initiated both inside and outside of a building. e. Signals cannot be guaranteed at the exact time a lockdown is initiated. Frequent self tests are recommended to ensure proper performance of the system. f. All wireless devices should be installed with consideration given to nearby metal objects. Performance could be impacted.

5. SIGNAL DELAY: a. Typical lockdown response time is 10 to 20 seconds from the initiation of a signal. Typical lockdown clear response time is 10 to 20 seconds from the initiation of a signal. However, certain conditions could impact this delay.

6. SIGNAL CONFIGURATION: a. Each 9KX lock and repeater can be programmed to include an additional delay anywhere from 1 to 60 seconds after the receipt of a signal (over and above the 10-20 second typical response time). b. 9KX LED/Sound Configuration: LED and sound configuration options can be disabled from the Shelter System. Please note if these options are disabled the user will not have any visual or sound confirmation that the 9KX lock received a lockdown signal.

7. OPEN DOOR: a. The Shelter System does not come with a door closer solution. Therefore, all doors must remain in a closed position for the locking mechanism to work. If a door is open when a lockdown is initiated it will still revert to a locked position but will need to be manually closed to restrict the area.

8. RIGHT OF EGRESS: a. The Shelter system has been designed to prevent entry into a room when a threat is present, however, the inside lever of the 9KX will not lock which will allow for a right of egress at all times. You will always be able to exit a room, even during a lockdown. 9. MECHANICAL KEY: even during lockdown mode a mechanical key will still be able to operate the latchbolt and open a door. End Users are encouraged to maintain security and control of mechanical keys at all times.

10. INTERNET CONNECTION: a. The Shelter System is offered with a Gateway Cloud Service to set up, configure, test and monitor the Shelter system. A public internet connection is required to set up and configure the Shelter System. While use of the Gateway Cloud Service is recommended to get the best use out of your Shelter system, it is not required. Users can log on to their gateway via a local internet connection to perform minimal configuration and management of the Shelter system. Not all features and functions of the software are available via the local gateway.

b. A local internet connection is not required to initiate or clear a lockdown if repeater inputs have been configured to perform an all clear of the lockdown.

11. TRAINING, TESTING, USE, DRILLS a. Frequent testing of the Shelter System is strongly recommended, including scheduled self testing via Gateway Cloud Service. b. Any changes to building construction or layout should be followed up with proper testing. c. Any further addition of wireless devices to the building should be followed up with the proper testing. d. Any changes in staff or personnel who are holders of a fob should be followed up with proper testing and training. e. Any changes in products connected or integrated with the Shelter system should be followed with proper testing. f. Once a door is locked it can still be manually opened on the inside to allow entry for those individuals who were not able to access the area prior to the lockdown. Users should have appropriate training and security plans in place to secure persons who are not able to enter an area prior to the lockdown being implemented.

g. Testing of the Shelter System without the Gateway Cloud Service will be a manual effort and not allow you to test all function or capabilities. h. Final testing may result in the need for additional products, including gateways, repeaters, fobs, etc. The Stanley 9KX lock and Shelter Gateway can be configured to become a site survey tool and may provide an initial recommendation on products needed, however, each end user is responsible for working with their own facility management, distributor or third party integrator to determine final products required to ensure proper performance of their Shelter System. Stanley does not guarantee the accuracy of any site surveys.

i. As conditions to the end user?s environment changes, additional equipment may be required. Stanley is not responsible for providing additional equipment as end user?s conditions or environment changes. 12. Multiple FOB Use: it is highly recommended to test a facility with the maximum amount of FOB users at the same time to ensure proper performance of the Shelter System. If delays or performance impacts occur please contact your Stanley Representative for recommendations. 13. FOB Battery: FOBs should be regularly tested to ensure proper performance of the FOB and Lock. Battery life needs to be monitored and managed.

14. GATEWAY/REPEATER: a. Gateways should be installed in a climate controlled and secure area. b. All wiring or hardware should be in a secure area and not exposed to potential tampering. c. Installation of repeater in an outside environment should be installed with the recommended water tight seal or connections.

15. LICENSING/REGULATIONS: a. It is Customer's responsibility to obtain all necessary use permits, licenses, etc. required by the local jurisdiction for installation of any Shelter components. b. If any Governmental agency requires any changes in the Shelter System originally installed, Customer agrees to pay for such changes.

CAL-ROYAL

MERCHANDISE WARRANTY

Goods are warranted against defects in manufacture for one year. The company makes no other warranty, and all implied warranties including any warranty of merchantability or fitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above. The company?s maximum liability hereunder is limited to the purchase price of the products in no event shall the company be liable for any consequential, indirect, incidental or special damages of any nature arising from the sale or use of this product, whether in contract, tort, strict liability or otherwise.

Products will not be accepted for repair or replacement under this warranty unless we have given prior authorization for their return. Upon receipt of products returned for repair or replacement we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement involved and will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair in which case we will pay what we consider to be the reasonable cost thereof. All materials and finishes meet ANSI/BHMA standards at time of shipment. We do not warrant finishes exposed to hostile environments, such defect has been caused by corrosion or ordinary wear and tear.

CAL-ROYAL LIFETIME LIMITED WARRANTY The Cal-Royal Products listed below are warranted against defects in mechanical workmanship and 3 year finish warranty for the life of the opening into which they are installed. This warranty is valid only if the products are installed according to the manufacturers? explicit directions, are the correct application for the opening in question (i.e.: a grade 2 lock is not acceptable in a school or university application) and those products that require adjustment at installation are adjusted correctly. It is assumed that if either the door or frame components in the opening has been violated and therefore the Warranty of those Cal-Royal products in that opening would be null and void. It is also assumed by this Warranty that those products that require periodic adjustment or maintenance are receiving that attention through the life of the opening.

This warranty DOES NOT COVER: 1. Abuse or vandalism 2. Products used in an incorrect application 3. Scratches or normal wear in a products finish (Does not cover US10B/613) 4. Products that have been improperly installed or adjusted 5. Any Product installed in a hostile environment causing premature corrosion, wear and tear 6. The cost incurred in removing and installing a replacement product. Upon return of defective product to CalRoyal Products, Cal-Royal may repair or replace the product or refund the purchase price. Cal-Royal is not liable for incidental or consequential damages. The products that are covered by the above Lifetime Limited Warranty are: 1. All commercial Grade Hinges. 2. Genesys, Calypso, Omega, NM Series Grade 1 Locks ? Mortise and Cylindrical Locksets. 3. Apollo, Columbus, HIL, Pioneer, Commander, Challenger, Explorer, Barrington, Polygon Grade 2 locksets. 4. CRB Series Grade 1 & CB160, T300 Series Grade 2 Deadbolts. 5. 900, CR441, CR801/CR801S, 300, 700 Series Grade 1 Door Closers. 6. 7700, 9800 and 2200 Series Grade 1 Exit Devices. Cal-Royal Locksets, Door Closers, Exit Devices and Door Hardware are designed to provide the highest standard of product quality and performance. To maintain a long-lasting finish great care should be taken. Constant use and exposure to elements and high traffic would require cleaning on a regular basis. ELECTRIFIED HARDWARE WARRANTY (3 YEARS LIMITED WARRANTY) LIMITED WARRANTY: Cal-Royal Products (CRP) warrants that its products are free from defects in workmanship and material under normal use and service. Since CRP does not control product usage, CRP makes no representation as to the degree of security conveyed by the use of any product. This warranty does not cover defects or damage which occur from improper maintenance, improper storage, improper installation, shipping and handling, ordinary wear and tear, misuse, abuse, accidents, unauthorized service, work done by others or consequential damages.

CRP will not pay for the cost of repair performed other than in accordance with this warranty. CRP can only perform authorized warranty work at the factory. CRP's only liability, in tort or contract, whether under this warranty or otherwise, is limited to providing repair or replacement of any product or component part which is proven to be defective as covered by the warranty, within three (3) years after delivery from CRP to the original purchaser. Written notice of a product or component part believed to be defective, as covered by this warranty, should be sent to CalRoyal Products 6605 Flotilla St, Commerce, CA 90040. Include Claimant's name, address, phone, and identification. such product or component part, with shipping charges prepaid for examination, and in the event such examination reveals a defect covered by this warranty, the product will be repaired or replaced. This warranty is in lieu of all other express warranties. To the extent permitted by law, all implied warranties are limited to the duration or this warranty. CRP shall not be liable for any incident or consequential damages. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary, from state to state.

ELECTRONIC DIGITAL KEYPAD LOCKSETS AND DEADLOCKS WARRANTY 1. CRCODE-007, CRCODE-101 Goods are warranted to be free from manufacturing defects in material and workmanship which carries a ONE YEAR Limited Warranty on Electronic Series Locks (CRCODE-007) and a TWO YEAR Limited Warranty on Mechanical Series Locks (CRCODE-101) and its conditions, limits and policies.

2. CR3000 DIGITAL KEYPAD DOOR LOCK WARRANTY Goods are warranted against defects in manufacture for two (2) years after the date of manufacture. The company makes no other warranty, all implied warranties including any warranty of merchantability or fitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above.

3. ELDB-89 DIGITAL KEYPAD DEADLOCK WARRANTY Goods are warranted against defects in manufacture for twenty five years (25) years after the date of manufacture for mechanical parts and one (1) year for electronic parts. The company makes no other warranty; all implied warranties including any warranty of merchantability or fitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above. The company?s maximum liability hereunder is limited to the purchase price of the products in no event shall the company be liable for any consequential, indirect, incidental or special damages of any nature arising from the sale or use of the product, whether in contract, tort, strict liability or otherwise. Seller?s warranty shall not be enlarged, diminished or affected by no obligation or liability shall arise out of Seller?s rendering of technical advice or services in connection with Buyer?s order of the goods furnished hereunder.

This warranty DOES NOT COVER: 1. Abuse or vandalism 2. Products used in a wrong application 3. Scratches or normal wear in a products finish (Does not cover US10B/613) 4. Products that have been improperly installed or adjusted 5. Any products installed in a hostile environment causing premature corrosion, wear and tear 6. The cost incurred in removing and installing a replacement product. Upon return of defective product to CAL-ROYAL Products, CAL-ROYAL may repair or replace the product or refund the purchase price. CAL-ROYAL is not liable for incidental or consequential damages.

CAL-ROYAL RECOMMENDS THAT THE UNIT AND ITS FUNCTIONS BE TESTED REGULARLY Despite excessive testing, and due to but not limited to, any or all of the following; electrical or communications disruption, criminal tampering, it is possible for the unit to fail to perform as expected. CAL-ROYAL does not represent that the product may not be compromised or circumvented; or the product will prevent any property loss, personal injury, robbery, fire or otherwise; nor the product will in all circumstances provide adequate warning or protection. A properly installed and maintained locking device may only reduce the risk of burglary, robbery, fire or otherwise, but this is not an assurance that these events will not occur. Seller shall have no liability for any loss, property damage, personal injury based on a claim that the unit/product failed to give warning. It is therefore the obligation of the installer to advice or inform the consumer to take any or all precautions for his or her safety including, but not limited to, fleeing the premises and calling the proper authorities in order to mitigate the possibilities of harm, injury and/or damage.

CAL-ROYAL is not liable of either the property or safety of the user?s family, employees, and limits its liability for any loss or damage including incidental or consequential to CAL-ROYAL?s original selling price of the product regardless of the cause of such loss or damage. Products will not be accepted for repair or replacement under this warranty unless we have given prior authorization for their return. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify the customer of estimated cost of repair or replacement involved and will obtain authorization prior to proceeding. We have no liability to pay any cost of repair performed by anyone other than us, unless in each instance we have given prior written approval of such repair in which case we will pay what we consider to be reasonable cost thereof.

In the event of a defective product, contact the security professional who installed and maintains your security system. In order to abide by this warranty, the defective product must be returned by the security professional, shipping costs prepaid and insured to CAL-ROYAL. After replacement or repair of the product, CAL-ROYAL assumes the cost of returning products under warranty. CAL-ROYAL shall have no obligation under this warranty, or otherwise, if the product has been repaired by others, improperly installed, improperly used, abused, altered, damaged, subject to accident, nuisance, flood, fire or acts of nature. CAL-ROYAL will not be responsible for any dismantling, reassembly or reinstallation charges.

All materials and finishes meet ANSI/BHMA standards at time of shipment. We do not warrant fixes exposed to hostile environments, such defect has been caused by corrosion or ordinary wear and tear. This warranty and remedies set forth above are exclusive and in lieu of all others, oral or written, expressed or implied. No dealer, distributor, agent or employee is authorized to make any modification or addition to this warranty. Some states do not allow the exclusion or limitation of implied warranties or limitation of liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you.

FINISH CARE Finishes on all products are produced to the highest quality standards to ensure they stay in perfect order year after year. However, some finishes can deteriorate if they are exposed to corrosive vapours, coastal air, salt spray or high humidity. Brass finishes are susceptible to tarnishing if they come in contact with air, moisture or wet paint, particularly in exterior locations. To overcome this, it is wise to coat all external brass finishes with a non-abrasive furniture or car wax immediately after installation, and to remove all locks before painting doors. Regular wiping with a soft cloth, occasional polishing with a non-abrasive furniture or car wax and take care not to scratch the protective finish on brass fittings will also prevent tarnishing.

? US3 (Polished Brass), US4 (Satin Brass), US5 (Antique Brass), US10 (Satin Bronze), US10A (Antique Bronze), US15 (Satin Nickel), US15A (Satin Nickel Oxidixed), ALUMINUM, DURO, GOLD laquered or clearcoated finihses can simply be cleaned by wiping with a clean soft damp (not wet) cloth. A mild soap may be lightly used if very dirty. Particular care should be taken to avoid using lacquer thinners, caustic soaps, abrasive cleaners or polishes as these could damage the coating and result in tarnishing. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth. ? PVD (Physical Vapor Deposition) is a technologically advanced finish coating that provides the most surface protection against environmental elements and everyday wear and tear. PVD matches clear-coated finishes in appearance, yet surpasses them in durability. PVD finishes protect against corrosion, tarnish, wear, discoloring and peeling for the lifetime of the part to which it has been applied. This kind of finish can be maintained by wiping with a clean soft damp cloth.

? US10B (Oil Rubbed Bronze) finishes can be wiped with a small amount of vegetable or mineral oil on a soft cloth. Excessive oil may cause residue to come off on contact with hands or clothing materials and would even attract dusts that would eventually become grime. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste of wax.

? US26 (Bright Chrome), US26D (Satin Chrome), US32 (Stainless Steel) and US32D (Satin Stainless Steel) can be maintained by wiping with a clean soft damp cloth. A high-grade chrome polish may be used according to directions to clean and restore the original shine and satin finish. o Depending on the environment where the product is used, blemishes can appear on stainless steel products To help prevent this occurring, clean once a month. Blemishes on satin stainless steel may be removed by rubbing with a suitable stainless cleaner/polish wadding polish. Ensure rubbing occurs in the same direction as to the grain itself.

MAINTENANCE Cal-Royal Locksets, Exit Devices and Door Closers were designed and manufactured to be maintenance-free under normal operating conditions and environments. Exposure to extremely heavy traffic and/or particularly dusty and dirty environmental conditions, however, may eventually cause unsatisfactory operation due to slow-moving parts or sticking cylinders. In this case, it may be necessary to clean and re-lubricate the lockset to maintain optimum performance.

Locksets ? To clean the lockset mechanism, use a non-corrosive substance or a penetrating or solvent type lubricant to loosen sticking components, then lubricate with lithium grease, silicone or teflon based lubricant ? Do not use lubricant in cylinder (oil or aerosol type) Cylinders ? When key becomes ?sticky? in cylinder, you may sprinkle a small amount of graphite onto the key and then insert the key inside cylinder ? To free sticking or jammed cylinders, lubricate with graphite or a non-oily lubricant (such as Lock-EZE) ? Do not use petroleum-based lubricants in the cylinder keyway. WD-40 or oil will collect dirt over time, and a liquid might even freeze in the lock if weather is cold enough. Graphite is the common choice, the powdered version of molybdenum disulfide would work as well ? Do not use lubricant in cylinder (oil or aerosol type).

CORBIN-RUSSWIN

Corbin Russwin, Inc. (Company) warrants that its products sold under the Corbin Russwin and Design? trade name in the United States of America are free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Corbin Russwin products or parts. This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification.

The only liability of the Company in tort or contract whether under this warranty or otherwise shall be limited to the repair or replacement of any product or component part which shall prove defective as covered by this warranty, within the stated time frame listed below, after delivery to the original purchaser.

Access 3 Cylinder.................................................................................................................1 year Pyramid Cylinders .............................................................................................................. 5 years CL3100 Series Cylindrical Locksets................................................................................... 10 years CL3300 Series Cylindrical Locksets..................................................................................... 7 years CL3500 Series Cylindrical Locksets..................................................................................... 7 years CL3800 Series Cylindrical Locksets..................................................................................... 7 years All other cylindrical locksets.................................................................................................1 year ML2000 Series Mortise Locksets ...................................................................................... 10 years Electrified Locksets............................................................................................................. 2 years ED3000, ED7000, ED8000 Series Exit Devices & Trim ..........................................................1 year ED4000, ED5000 Series Exit Devices & 900 Series Trim...................................................... 5 years All Other Exit Device Trim ....................................................................................................1 year Electrified Exit Devices........................................................................................................ 2 years FE5400S ............................................................................................................................ 7 years FE6700 .............................................................................................................................. 7 years FE6800 .............................................................................................................................. 7 years Access 800? CL33800 x TCAC2 Cylindrical...................... 7 years (mechanical), 2 years (electrical) Access 800? ML20800 x TCAC2 Mortise Locks.............. 10 years (mechanical), 2 years (electrical) Access 800? ED5000 x 9800 x TCAC2 Exit Devices.......... 5 years (mechanical), 2 years (electrical) DC3200 Series Closers..................................................................................................... 15 years DC5000 Series Closers..................................................................................................... 10 years DC6200 & DC6400 Series Closers ................................................................................... 25 years DC8000 Series Closers..................................................................................................... 25 years All Other Corbin Russwin Products ......................................................................................1 year MicroShield? Finish ..............................................................................................................1 year

Finishes: Corbin Russwin finishes are covered by a limited warranty period of one year after invoice date. Infini-T? finish is warranted against corrosion and tarnishing for lifetime of the product. Warranty Requirements for Cylinders Factory or Field Combinated: Cylinders are lubricated at the factory with a petroleum based lubricant (Medeco KeyLube). Cylinders should be lubricated periodically depending upon environmental conditions. Petroleum based lubricant is recommended. Never mix petroleum based lubricants with dry lubricants. Corbin

Russwin cylinder and/or core warranty will be voided if used in non-Corbin Russwin locking devices. Warranty Requirements for Cylinders Field Combinated: 1. Keys shall be cut to the Corbin Russwin key bitting specifications required for the particular keyway and depth system. 2. All pin lengths shall be selected according to prevailing factory standards. 3. Original Corbin Russwin cylinders and cylinder components, including pin tumblers and key blanks, shall be used. We reserve the right to void the warranty if we deem that a malfunction is a result of non-original components which do not conform to Corbin Russwin standards. Keying Systems:

All bittings shall be originated or authorized by the Corbin Russwin Key Systems Department to be compatible with one another in a specific type of cylinder (Pyramid, conventional, security, master ring, interchangeable core) and within a particular keying system. All components of electromagnetic products are covered by a limited warranty period of one year after invoice date thereof of the original purchaser from us. Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Corbin Russwin has been given. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty. If they do not, we will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Corbin Russwin prior to the work being done. The Company will not pay for the cost of repair performed other than in accordance with this warranty. Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Corbin Russwin, Inc. 225 Episcopal Road, Berlin, CT 06037, and should include your name and address, an identification of the product or component part and a brief description of the defect. Upon receipt of such notice, the Company will inform you where to ship such product or component part, shipping charges prepaid, for examination and, in the event such examination reveals defect covered by this warranty, the product will be repaired or replaced. The Company reserves the right to replace discontinued product with an equivalent product as deemed by the Company.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. CORBIN RUSSWIN, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

DETEX CORPORATION

Detex? ADVANTEX? and Value Series? panic hardware, when properly installed, used and maintained, is warranted to be free of defects in material and workmanship. We will, for a period of ten (10) years from the date of purchase, repair or replace any part which, upon our examination, proves to be defective under normal use. Electrical components, when properly installed and maintained, are warranted to be free of defects in material and workmanship for a period of three (3) years. This warranty will be honored only upon presentation of proof that the product covered thereby was purchased directly from an authorized Detex distributor.

WE SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE ARISING OUT OF THE FAILURE OF THIS PANIC HARDWARE TO OPERATE. Warranty Conditions: Detex power supplies are required when powering Delayed Egress and Latch Retraction exit devices. Failure to use Detex recommended power supplies will void manufacturers warranty

Limited Warranty: All Detex security hardware products or signaling devices are warranted to be free of defects in material and workmanship when properly installed, used and maintained according to instructions. We will, for a period of *three (3) years from the date of purchase, repair or replace any part which, upon our examination, proves to be defective under normal use. (This does not apply to batteries or to damage from battery leakage.)

This warranty will be honored only upon presentation of proof that the product covered thereby was purchased directly from an authorized Detex Distributor. WE SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE ARISING OUT OF THE FAILURE OF THE PRODUCT OR DEVICE. *ECL-230D, ECL-230D-PH, ECL-230X, ECL-600 and 90KR ? ten (10) years AO19 Series ? 3 year mechanical / 1 year electrical.

DORMA

Dorman Products warrants that, for the product and period stated in the table above, the product is free from defects in material and workmanship under normal use and service. As your exclusive remedy, Dorman will replace free of charge any Dorman product that in Dorman's reasonable determination does not comply with the foregoing warranty. This warranty becomes null and void if the damage is caused by: misuse, abuse or accident; the attachment of any unauthorized accessory; alteration to the product; improper installation; exposure to harsh weather and/or chemicals; or lack of proper maintenance. This warranty also becomes null and void if the product is opened or any sticker is tampered with, broken, or missing, or if the damage is caused by any other condition that is beyond the control of Dorman Products. IN ALL CASES, DORMAN SHALL NOT BE RESPONSIBLE FOR ANY TYPE OF INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES. ALL OTHER WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICUALR PURPOSE AND THE IMPLIED WARRANTY OF MERCHANTABILITY, ARE EXCLUDED.

By accepting this product, you hereby waive and release any claim now or hereafter existing against Dorman Products, its employees, officers, directors, agents and customers, on account of any and all claims, demands, suits, causes of action and all legal proceedings, whether civil or criminal, damages, losses, liabilities (including, but not limited to, strict liability in tort), obligations, penalties, judgments or fines and other sanctions, and any costs and expenses in connection therewith, including legal fees and expenses of whatever kind and nature, which may result from or arise out of injury to or death or loss or damage to property or the loss of use of any property which may result from or arise out of the possession, condition, use or operation this product.

Federal and/or state laws may provide you with other warranties for this product. Some states do not allow the exclusion or limitation of incidental or consequential damages. Should you need to replace any Dorman parts covered under this limited warranty, please see the store of purchase with your used part and original sales receipt.

GARDALL

Gardall Lifetime Replacement Warranty Gardall Safe Corporation assures to the original end consumer, replacement ? free of charge ? of any Gardall Fire-Resistive Record Safe damaged beyond repair by fire with a thencurrent produc tion model of a comparable value.

This warranty is exclusive and in lieu of any warranty of merchantability, fitness for particular purpose or other warranties of qualities, whether expressed or implied, and of all other liabilities and obligations on the manufacturer?s part. Gardall Safe Corporation reserves the right to inspect any record safe prior to replacement. Copies of insurance reports or documents pertaining to fire loss will be furnished to Gardall Safe Corporation upon request.

Gardall Safe Corporation specifically assumes no liability for installation or other charges incurred by the owner in connection with the replace ment of any record safe and assumes no liability for damage to contents or personal property contained in any such file or any consequential damages of any nature or description.

KABA-ILCO

Kaba Brand Limited Warranty Kaba Mas LLC ("Kaba Mas") warrants to the original purchaser that the product(s) shall be free of defects in material and workmanship for a period of one (1) year from the date of manufacture by Kaba Mas (complete locks), and sixty (60) days (parts). Kaba Mas warrants the X-10 High Security Lock, beginning with serial number X10X001003252014ARM (March 25, 2014) for a period of two (2) years from the date of manufacture. This warranty applies provided there is compliance with all installation/operating instructions supplied by Kaba Mas and, provided further, that the product has been subject to normal use without any misuse, negligence, modification, or the occurrence of any accidental damage.

Kaba Mas MAKES NO OTHER WARRANTY WITH RESPECT TO THE PRODUCT, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY AS TO SUITABILITY OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE OR THE MERCHANTABILITY THEREOF AND SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE SUSTAINED THROUGH BURGLARY, THEFT, ROBBERY, FIRE OR OTHER HAZARD. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS EXPRESSED OR IMPLIED BY LAW AND/OR CUSTOM. In the event of a defect in materials or workmanship covered by this warranty, the purchaser shall return, at purchaser's expense, the product to Kaba Mas for repair or replacement. Repair or replacement shall be at the election of Kaba Mas. The purchaser's sole remedy shall be the repair or replacement of the product and under no circumstances shall Kaba Mas be liable to the purchaser or any other person for any consequential, incidental, economic, direct, indirect, general or special damages arising out of any breach of warranty. In no event shall Kaba Mas's liability exceed the original cost of the product.

This warranty and remedies set forth above are exclusive and in lieu of all others, oral or written, expressed or implied. No dealer, distributor, agent or employee is authorized to make any modification or addition to this warranty. Kaba Mas EXPRESSLY DISCLAIMS ANY WARRANTY OF NON-INFRINGEMENT PROVIDED UNDER KRS 355.2.312, UCC ?2-312, OR SIMILAR LAW. KABA MAS SHALL NOT INDEMNIFY NOR BE RESPONSIBLE FOR ANY DAMAGES ARISING OUT OF A CLAIM THAT THIS PRODUCT INFRINGES ANY PATENT.

Some states do not allow the exclusion or limitation of implied warranties or limitation of liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. NOTICE Installation of the product with any unapproved accessorial item or product may invalidate the Kaba Mas, LLC Limited Product Warranty.

LCN

Term: The limited warranty period for Products is as stated in the Product Table above. The ?Commencement Date? for a limited warranty period shall be the date of Company's delivery to the original purchaser of the Products. Proof of Product purchase may be required by Company to confirm the Commencement Date.

What Company will do: Company may require proof of Product purchase in order to provide coverage under this limited warranty. As Company's only responsibility and user?s only remedy under this limited warranty, Company will furnish a replacement Product upon receipt and confirmation by Company, in its sole opinion, that the Product has, in fact, failed due to a manufacturing defect under normal use and maintenance. In the event a replacement Product cannot be provided, Company will either provide a suitable replacement Product or a refund in the amount of the original purchase price.

What is not covered: The following costs, expenses, and damages are not covered by the provisions of this limited warranty: (i) labor costs including, but not limited to, such costs as removal and installation of Product; (ii) shipping and freight expenses required to return Product to Company; (iii) failures, defects, or damage caused by any third party product or service; (iv) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages.

The provisions of this limited warranty do not apply to Product that is: (i) not the proper size for the application for which the Product is used; (ii) not installed in accordance with Company?s published Product installation instructions; (iii) installed with improper parts and/or incorrect parts (NOTE: It is recommended that Product be installed with LCN fasteners provided with Product); (iv) improperly stored, maintained, or operated; (v) modified, repaired, or altered in Company?s sole opinion, in any manner, without the express written consent of Company; (vi) used for purposes for which the Product is not designed or intended; (vii) subjected to misuse, abuse, negligence, or accident; or (vii) subjected to improper temperature, humidity, or other environmental conditions.

Note: 900/7900 Series compressors are not manufactured by Company and are excluded from coverage under this limited warranty. For more information, parts, or repairs concerning the compressors, contact the compressor manufacturer directly at (269) 926-6171. Additional Terms: This limited warranty is in lieu of all other warranties, express or implied. Company does not authorize any person to create for it any obligation or liability in connection with Product. Company?s maximum liability hereunder is limited to the original purchase price of the Product. No action arising out any claimed breach of this limited warranty by Company may be brought by the user more than one (1) year after the cause of action has arisen.

How local law applies: This limited warranty gives you specific legal rights, and you may also have other rights as permitted by law. Some local laws do not allow limitations on how long an implied warranty lasts or the exclusions or limitation of incidental or consequential damages so the limitations or exclusions provided herein may not apply to you. Program and Warranty Claims: All Product claimed to be defective under this limited warranty shall be sent to: LCN, Warranty and Replacement Department, 121 West Railroad Avenue, P.O. Box 100, Princeton, Illinois USA 61356-0100.

LSDA

All LSDA Locksets, Leversets, Padlocks, Door Closers, Exit Devices and Safes are warranted to be free from defects in workmanship and materials under normal use and service. LSDA shall at its option replace or repair these products, provided: 1) Proof of purchase is provided to establish warranty period. 2) Keyed products are returned with one original key.

This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping or handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with non-compatible products or parts, nor against the consequences of uses for which our products were not designed.

NOTE: THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF QUALITY, WHETHER WRITTEN, ORAL OR IMPLIED (INCLUDING ANY WARRANTY OF THE MERCHANTABILITY OR FOR CONSEQUENTIAL DAMAGES). LSDA IS RESPONSIBLE ONLY FOR THE REPAIR OR THE REPLACEMENT OF THE ITEM, AND NOT FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE, EXPENSE, OR LOSS INCURRED BY PURCHASER RESULTING FROM THE USE OF THE PRODUCT. FULL WARRANTY STATEMENTS AVAILABLE UPON REQUEST.

MEDECO

Medeco warrants to the original purchaser of a Medeco branded lock, lock cylinder, or electromechanical door hardware product to be free of defects in material and/or workmanship for a period of two (2) years from the date of original purchase for use. This Warranty may also apply to other specific products. For additional Warranty information or Warranty claim service contact Medeco Customer Service at (800) 839-3157 or in Canada (888) 633-3264. In the event of a defect in material or workmanship during the Warranty period, Medeco? will repair or replace (at its option) the Product under the conditions of this Warranty, this action being the sole remedy available to the purchaser under this express limited Warranty.

Limitations, Exclusions and other Rights:

a. Medeco? disclaims liability for implied warranties including but not limited to those of merchantability or fitness for any particular purpose. b. Medeco? disclaims liability for indirect, incidental or consequential damage at any time. c. Medeco? warrants that Maxum deadbolt products are free from defects in materials and workmanship for the life of the product. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, ordinary wear and tear, misuse, abuse, or accident. d. This Warranty gives specific legal rights and a buyer may also have other rights that may vary from state to state. Some states do not allow limitations on indirect, incidental, and consequential damages or implied warranties so that the above limitations may not fully apply. e. Medeco? keyblanks are made from a special nickel silver alloy. Medeco warrants its mechanical keys against defects in workmanship or breakage for the life of the Product. Bitted Medeco keys must be precisely cut to exact angles and depths, and require special duplication. This Warranty shall be void and Medeco? disclaims liability of any kind in the event any key other than a genuine Medeco key has been used with the Product or that the key has been cut on any machine other than a Medeco or Medeco?-approved key cutting machine. f. Medeco? shall not be held responsible for damage arising from, in its sole judgment, improper installation, failure to provide normal maintenance, extreme environmental conditions, use rates in excess of the industry standards defined for the type of product, use of incompatible parts or products not made or authorized by Medeco, or application of force not resulting from normal use. g. Unless otherwise specified by separate warranty, finishes are warranted for a period of two (2) years following purchase for use. This finish Warranty shall be considered void after installation if, in the sole judgment of Medeco?, the damage to the finish is the direct result of extreme climatic conditions, chemical or abrasive actions.

Sargent & Greenleaf

What is Covered: Sargent and Greenleaf, Inc., including its subsidiary Sargent and Greenleaf S.A. warrants that all Products manufactured by S & G and sold under its trade names Sargent and Greenleaf, S&G, and Stanley are free of defects in materials and workmanship as outlined below. The sole and exclusive liability of S&G under this warranty is limited to the repair or replacement of any Product or component part covered by the warranty at the sole discretion of S&G.

Who is Covered: This warranty is extended only to S&Gs resellers or OEMs of Products and the end user who purchases Products for purposes other than resale (collectively, ?Purchaser?).

Warranty Period: S&G warrants that all S&G Products, except as otherwise specified below*, shall be warranted for a period of one (1) year from the date of shipment from S&Gs point of manufacture. *6100 Series Electronic Locks, 6300 Series Electronic Locks, Titan 2006/2007 and Spartan 1006/1007 series electronic locks, 6730 series mechanical combination locks, and Environmental Padlocks shall be warranted for a period of two years from the date of shipment from S&Gs point of manufacture.

*The 2740B electromechanical safe lock shall be warranted for a period of five (5) years from S&G?s point of manufacture. *Arm-A-Door mechanical components shall be warranted for a period of five (5) years from S&G?s point of manufacture. Arm-A-Door alarm components shall be warranted for a period of one (1) year from S&G?s point of manufacture.

*2890B PDL High Security Pedestrian Door Lock ordered and installed with the S&G Model 2740B Lock shall be warranted for five (5) years from the date of shipment.

*2890B PDL High Security Pedestrian Door Lock ordered and installed without the S&G Model 2740B Lock and rather with an alternate lock shall be warranted for two (2) years from the date of shipment.

Software: ? S&G warrants that all software shall be free from defects in materials and workmanship and will function in substantial accordance to the specifications for a period of ninety (90) days from the date of shipment. ? Specific Limitations: This warranty does not cover any post-sale technical support under the following circumstances: ? Problems caused by misuse of software or hardware ? Failure to provide a network connection or site phone line for a modem connection, if deemed necessary by S&G ? Technical support for network software products ? Technical support for software installed on computer hardware or computer operating system that is no longer commercially available for purchase

? Technical support for obsolete operating systems Warranty Claims: Any Products believed to be defective as covered by this warranty may not be returned without prior written Returned Goods Authorization (RGA) from S&G Product Support 859-887-2057 or 800-634-4843 covering specific items and quantities within thirty (30) days from the discovery of the alleged defect(s). S&G will inform the purchaser where to ship said Product(s), shipping charges prepaid by you, for examination. In the event such examination reveals a defect covered by this warranty; S&G will, at its sole option, repair or replace the Product, and return it or its replacement to the purchaser, with charges only for shipping.

Exclusions: This warranty specifically excludes, and S&G shall not be held responsible for the following: a) COSTS ASSOCIATED WITH INSTALLING, REMOVING OR REINSTALLATION OF THE PRODUCT. b) Damage caused by Product malfunction or failure attributable to acts of God. c) Improper use or installation. d) Failure to follow S&G?s operating instructions or environmental specifications. e) Incorrect application, modification, vandalism, erosion or corrosion, shipping and/or handling, improper storage, accident, misuse, abuse or any other cause not within the control of S&G other than ordinary wear and tear. f) This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk and expense of the party making the modifications. g) The company shall not be liable for any repairs, replacements, or adjustments to the product or any costs of labor performed by the purchasers or others without the Company?s prior written approval. h) S&G provides no warranty or guarantee that its products will function properly or be mechanically compatible with products not manufactured by S&G.

i) S&G does not warrant its lock products to be impervious to forcible or surreptitious entry, and S&G shall have no liability for damage to or loss of property sought to be protected by any such lock. Third Party Warranty: Except as otherwise provided above, S&G makes no warranty, express or implied, with regard to third party hardware or software and expressly disclaims the implied warranties or conditions of merchantability or merchantable quality, fitness for a particular purpose, title, infringement and those arising by statute or otherwise in law. Customer?s sole recourse for warranty claims is with the manufacturer of the Product. However, S&G agrees to pass through any third party warranty that S&G receives from the manufacturer of the Products to buyer. The extent of any third party warranty details, terms and conditions, remedies and procedures may be expressly stated on, or packaged with, or otherwise accompanying the Products.

LIMITATION OF WARRANTIES: THIS WARRANTY IS GIVEN EXPRESSLY AND IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO UNDERSTANDINGS, AGREEMENTS, REPRESENTATIONS, OR WARRANTIES NOT SPECIFIED HEREIN. S&G SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES SUFFERED BY PURCHASER OR ANYONE CLAIMING BY, THROUGH OR UNDER PURCHASER, AS A RESULT OF THE CONDITION OF THIS PRODUCT, OR ANY PART OR PORTION THEREOF. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR STATE. THIS WARRANTY IS GOVERNED BY THE LAW OF THE STATE OF INDIANA WITHOUT REGARD TO ITS CONFLICTS OF LAW PRINCIPLES. S&G AND PURCHASER AGREE THAT THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS SHALL NOT APPLY TO SALE OF THE PRODUCTS COVERED BY THIS WARRANTY.

SCHLAGE

Subject to the terms and conditions of this warranty, Schlage Lock Company, LLC (Schlage) extends a limited lifetime mechanical and finish warranty and a limited three-year electronics warranty to the original consumer user (Original User?) of our Schlage brand product (Products) against defects in material and workmanship as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage Will Do: Upon return of the defective Product to Schlage, Schlages, sole obligation, at its option, is to either repair or replace the Product or refund the purchase price in exchange for the Product.

Original User: This warranty only applies to the Original User of Products. This Warranty is not transferable. What is Not Covered: The following costs, expenses and damages are not covered by the provisions of this limited warranty: (i) labor costs including, but not limited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return Products to Schlage; (iii) failures, defects, or damage (including but not limited to, any security failure or loss of data) caused by any third party product, service, or system connected or used in conjuction with the Product, and (iv) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

The provisions of this Warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; (viii) which, based on Schlage?s examination, do not disclose to Schlage?s satisfaction non-conformance to the warranty. Additionally, the limited lifetime warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals.

Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and, thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Products. Schlages maximum liability hereunder is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen.

How Local Law Applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product?s performance, the Original User may simply contact Schlage Customer Service at 888-805-9837 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program & Warranty Claims: If you encounter a non-standard residential door preparation or fit issue under the Guaranteed Fit Program, please contact Schlage Customer Service for a repair, replacement, or refund of the original purchase price in exchange for the Product.

To make a warranty claim, contact Schlage Customer Service:

U.S. and Canada Schlage Customer Service P. O. Box 1210 Olathe, KS 66051-1210 1-888-805-9837 (phone) 1-800-366-5625 (fax)

VON DUPRIN

Warranty: The Company warrants that the product manufactured by it and delivered hereunder will be free of defects in material and workmanship for a period as follows:

(1) exit devices and trim for 36 months from the date of placing the product in operation or for 42 months from the date of shipment; and (2) , and electrified exit devices and other electrified products for 12 months from the date of placing the product in operation or 18 months from the date of shipment, whichever shall first occur.

The Purchaser shall be obligated to promptly report any failure to conform to this limited warranty, in writing, to the Company within said limited warranty period, whereupon the Company shall, at its option, correct such nonconformity, by suitable repair to such product or, furnish a replacement part F.O.B. point of shipment; provided the Purchaser has stored, installed,maintained and operated such product in accordance with good industry practices and has complied with specific recommendations of the Company. Accessories or product furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed on to the Purchaser. The Company shall not be liable for any repairs, replacements, or adjustments to the product or any costs of labor performed by the Purchaser or others without the Company?s prior written approval.

The effects of corrosion, erosion and normal wear and tear are specifically excluded from this limited warranty. Performance warranties are limited to those specifically stated within the Company?s proposal. Unless responsibility for meeting such performance warranties are limited to specified shop or field tests, the Company?s obligation shall be to correct in the manner and for the period of time provided above.

The Company makes no other warranty or representation of any kind whatsoever, expressed or implied, except that of title, and all implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed. No agent, representative, dealer, or employee of Company has the authority to increase or alter the obligations of this limited warranty.

Correction by the Company of nonconformities whether patent or latent, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of the Company for such nonconformities, whether based on contract, warranty, negligence, indemnity, strict liability or otherwise with respect to or arising out of such Equipment.

The Purchaser shall not operate product which is considered to be defective, without first notifying the Company in writing of its intention to do so. Any such use of product will be at the Purchaser?s sole risk and liability and will not be covered by this limited warranty.

Customer Care: 877-671-7011
RMA requests (Return Material Authorization) are to be directed to:
Von Duprin - 2720 Tobey Drive, Indianapolis, IN 46219. Attn: Customer Service.

WEISER

Lifetime Mechanical Warranty

Lifetime Finish Warranty

Collections By Weiser? products provide a "Lifetime Mechanical Warranty" that covers all defects in material and workmanship. This warranty excludes locks that have been damaged by installation contrary to our written instructions or modified with non-Weiser components. Effective December 1, 2001 Weiser extends a "Lifetime Finish Warranty" against corrosion, tarnishing or discoloring on its Collections By Weiser? products. This warranty excludes scratches or abrasions, misused or abused products or products used in commercial applications. ?Commercial? is defined as any application other than those found on private residences. In order to qualify for the lifetime Finish Warranty, purchaser must have a proof of purchase dated no earlier than 12/1/2001 or the product in question must have a production date stamp of 12/1/2001 or later. As an exception, the Lifetime Finish Warranty applies to all Collections By Weiser? products with a Brilliance? finish (Bright Brass, Bright Chrome or Satin Chrome) regardless of purchase or production date. These warranties last while the original purchaser lives and owns th elock. Incidental or consequential damages are excluded. (Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion may not apply to you). To register a warranty claim in the USA, please return the product, freight pre-paid to: Customer Service Weiser 19701 DaVinci, Lake Forest, CA 92610. To register a warranty claim in Canada, please contact us by our toll free number 1-800-501-9471. Weiser will repair or replace the lock, or refund the purchase price (if it is not practical to repair or replace). You will be responsible for the removal of the old lock and reinstallation of the new one. This warranty provides you with specific legal right and you may also have other rights that vary from state to state.

YALE

LIFETIME LIMITED WARRANTY

TOTAL SATISFACTION GUARANTEE

YALE SECURITY INC., the "Warrantor" extends the following LIFETIME LIMITED WARRANTY to the original purchaser of Yale Real Living'M': Design Elements' M from Yale?, YH Collection"' from Yale, New Traditions from Yale, Yale Edge Series ,,.,,. and Interconnected Series (herein the "lockset" or "locksets"tt): ''.Lifetime Limited Warranty for Finish and Mechanical, Electronics warranted ONE (1) YEAR ''''?Yale Edge Series components warranted ONE (1) YEAR Finish & FIVE (5) YEAR Mechanical

YALE SECURITY INC. does not warrant defects with respect to any products that we determine were improperly installed or were the consequences of uses for which our products were not designed. This warranty does not cover finish defects caused by the use of paints, solvents, or other chemicals which come in contact with the lockset or resulting because the products were otherwise operated, maintained, repaired or altered improperly or contrary to our applicable instructions. This warranty shall expire at such time as the original end user of the warranted product transfers ownership thereof to any other person.

Our only liabilty, whether in tort, or contract under this warranty or any expressed or implied warranty, is, at our option, to repair or replace locksets that are returned, shipping charges prepaid and with our prior written authorization, to our customer shipping department at the address set forth below. IN NO EVENT SHALL YALE SECURITY INC. BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR DIRECT OR INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES, ARISING BY REASON OF A BREACH OF THIS WARRANTY.

Products may only be returned to us hereunder. We will determine whether locksets returned for repair or replacement, qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated cost of repair or replacement and will obtain authorization prior to proceeding. We have no liability to pay any costs to repairs performed by anyone other than us, unless in each instance we have given written approval to such repair. YALE SECURITY INC. shall not be responsible for any costs incurred for the removal or reinstallation of locksets under the terms of this warranty. Cosmetic claims will be replaced only one time at no charge. tt When the lockset has been used for commercial, institutional, industrial or other installations other than single-family dwellings, the mechanical parts warranty is reduced to THREE (3) YEARS and the finish warranty is reduced to ONE (1) YEAR.

YALE SECURITY INC. MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE PRODUCTS DELIVERED HEREUNDER. THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCTS SOLD HEREUNDER.

SOME STATES DO NOT ALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Yale Locks & Hardware - 100 Sargent Drive - New Haven, CT 06511 - 800-438-1951

Back to Top


Aiello's Locksmiths of Atlanta (404) 456-3817 - Manufacturer Warranties!