ACCESS CONTROL



BORED LOCKS


      • 11 Line Lever Lock.

        Photo by: Sargent ASSA-ABLOY

      • 11 Line Lever Lock:

        The SARGENT 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can.

      • 10 Line Cylindrical Lock.

        Photo by: Sargent ASSA-ABLOY

      • 10 Line Cylindrical Lock:

        The SARGENT 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by nine times the ANSI 156.2 Series 4000 Grade 1 standards, at over 9 million cycles. As for abusive force, this lock endures more than 1.5 times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

      • 7 Line Grade 2 Lever Lock.

        Photo by: Sargent ASSA-ABLOY

      • 7 Line Grade 2 Lever Lock:

        Best overall lock in the Grade 2 class.

        A key-in-lever lock designed for standard duty commercial interior and exterior applications in public buildings, medical offices, hotels/motels and government facilities. Exceeds ANSI/BHMA A156.2 standards for cycling and durability.

      • DL Series Tubular Lock.

        Photo by: Sargent ASSA-ABLOY

      • DL Series Tubular Lock:

        The DL series tubular lock is designed for ease of installation with the quality you expect from the SARGENT name. The DL Series exceeds the expectations of the most demanding architects and design professionals. All Studio Collection and Coastal Series levers, as well as standard levers, can be used with the DL series.

      • 6500 Line Lever Lock.

        Photo by: Sargent ASSA-ABLOY

      • 6500 Line Lever Lock:

        The SARGENT 6500 Line is a standard duty key-in-lever lock designed to exceed the requirements of ANSI A156.2 Series 4000 Grade 2.

      • 8X Series Lock.

        Photo by: Sargent ASSA-ABLOY

      • 8X Series Lock:

        The SARGENT 8X line is designed and tested for robust applications. The Grade 1 bored-in lock is a worry free solution.

      • 6 Line Series Lock.

        Photo by: Sargent ASSA-ABLOY

      • 6 Line Series Lock:

        The 6 Line is a highly styled standard duty lock line incorporating a broad specturm of functions, designs and finishes. Ideally suited for fine homes, apartments, hotels and commercial buildings.


DEADBOLTS


      • 480 Series Deadbolt.

        Photo by: Sargent ASSA-ABLOY

      • 480 Series Deadbolt:

        The 480 series is a high grade cylindrical deadbolt which meets ANSI A156.5 Grade 1 requirements.

      • 470 Series Deadbolt.

        Photo by: Sargent ASSA-ABLOY

      • 470 Series Deadbolt:

        The 470 series is a medium grade cylindrical deadbolt which meets Grade 2 ANSI 156.5 1000 series specifications.

      • 8200 Series Deadbolt.

        Photo by: Sargent ASSA-ABLOY

      • 8200 Series Deadbolt:

        SARGENT Deadbolts are designed and constructed with high quality components to provide maximum security, performance and durability. These locks represent over a century of innovation and experience in manufacturing hardware and are the industry�s benchmark item.

      • 4870 Series Deadbolt.

        Photo by: Sargent ASSA-ABLOY

      • 4870 Series Deadbolt:

        The SARGENT 4870 Series Deadbolt is a heavy duty deadbolt that assures safety and security.

      • SSL1 Security SideLite Spring Latch.

        Photo by: Sargent ASSA-ABLOY

      • SSL1 Security SideLite Spring Latch:

        SARGENT SSL1 is a spring loaded latchbolt retracted by a thumb turn on one side with no operation on the other side. This is the perfect solution for applications such as the Security Panel on the Security Sidelite from CECO and CURRIES. Other applications include the top portion of a dutch door, communicating doors and shallow closets.


DOOR CONTROLS


      • 351 EHT/EHTD Series.

        Electromechanical Closer-Holder Release Devices.

        Photo by: Sargent ASSA-ABLOY

      • 351 EHT/EHTD Series Electromechanical Closer-Holder:

        The EHT Series of Electromechanical Closer-Holder Release Devices is designed to hold open fire rated doors until power is interrupted by a fire alarm condition or remote release switch. With its rugged track design, the 351 EHT is suitable for multiple manual operations. It is also applicable for non-rated doors such as offices or conference rooms, where the convenience of an electrically controlled closer-holder device may be desirable.

      • Fire Guard 2409 Series.

        Electromechanical Closer-Holder Release Devices.

        Photo by: Sargent ASSA-ABLOY

      • Fire Guard 2409 Series Electromechanical Closer-Holder:

        The Fire Guard 2409 Series of Electromechanical Closer-Holder Release Devices are designed to hold open fire and smoke rated doors until power is interrupted by a fire alarm condition or remote release switch. The Fire Guard Series is also available with an integrated photoelectric smoke detector for use in facilities lacking a fire/smoke detection system or where a redundant system is required for added life and safety protection.

      • Fire Guard 2900 Series.

        Electromechanical Closer-Holder.

        Photo by: Sargent ASSA-ABLOY

      • Fire Guard 2900 Series Electromechanical Closer-Holder:

        The 2900 Series Fire Guard Closer-Holder satisfies fire and building codes which require that doors be 'self-closing' to stop the spread of fire and smoke. The 2900 Fire Guard offers multi-point hold open and allows the door to be held open during normal operation of the building, while providing for automatic closing during fire (emergency) conditions.

      • 1560 Series.

        Electromechanical Closer-Holder.

        Photo by: Sargent ASSA-ABLOY

      • 1560 Series Electromechanical Closer-Holder:

        The 1560 door holders are designed for use with self-closing fire and smoke barrier doors and helps in controlling the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing.

      • 422 Cam Action Closer.

        Photo by: Sargent ASSA-ABLOY

      • 422 Cam Action Closer:

        The high performance design of the 422 Cam Action Closer ensures doors that are light to open for ADA compliance, with the right amount of closing force to handle a wide range of environments. The closer's non-hold open track and internal spring are specifically built to protect the door and frame in abusive, high-traffic conditions.

      • 1431 Series Aluminum Door Closer.

        Photo by: Sargent ASSA-ABLOY

      • 1431 Series Aluminum Door Closer:

        The 1431 Series is a complete line of surface door closers for interior and exterior doors with flexibility to meet virtually every application. A full complement of arm types and front-facing valves make installation and maintenance easy.

      • 1351 Series Aluminum Door Closer.

        Photo by: Sargent ASSA-ABLOY

      • 1351 Series Aluminum Door Closer:

        The 351 Powerglide line of surface door closers has been engineered to meet the demands of architects and building owners. The 351 Series is a complete line of closers for interior and exterior doors with quality and flexibility to meet virtually every application.

      • 281 Serie Cast Iron Powerglide Closer.

        Photo by: Sargent ASSA-ABLOY

      • 281 Serie Cast Iron Powerglide Closer:

        The 281 Powerglide line of surface door closers have been engineered to meet the demands of architects and building owners. The 281 series is a complete line of closers for interior and exterior doors with quality and flexibility to meet virtually every application.

      • 268 Series Concealed Closer.

        Photo by: Sargent ASSA-ABLOY

      • 268 Series Concealed Closer:

        The 268 Series is a complete line of concealed closers for interior and exterior doors with quality and flexibility to meet virtually every application. When security is desired the concealed nature of the 268/269 closer provides a high degree of resistance to abuse since the arm, track and closer is completely concealed when the door is closed.

      • 269 Concealed Door Closer.

        Photo by: Sargent ASSA-ABLOY

      • 269 Concealed Door Closer:

        The 269 Concealed Door Closer provides exceptionally strong closing forces and is the ideal closer to use with heavy doors or exterior doors opening to 180 degrees. This SARGENT closer combines a durable spring and the resilience of a Grade 1 product to offer lasting, dependable service where surface applied units may not be suitable.

      • 278 Series Concealed Door Closer.

        Photo by: Sargent ASSA-ABLOY

      • 278 Series Concealed Door Closer:

        The 278 Series is a Concealed Door Closer with Exposed Arm that is a rugged exit device in surface vertical rod and rim designs. The door closers are adjusted to meet ADA conditions or other reduced opening force requirements.

      • 1331 Series Aluminum Door Closer.

        Photo by: Sargent ASSA-ABLOY

      • 1331 Series Aluminum Door Closer:

        The SARGENT 1331 Series door closer can be used for the most common applications and is a Grade 1 fully adjustable closer. Available with a selection of arms and accessories, the 1331 Series door closer can be used for most common applications and is ideal for standard duty installations.

      • 1131 Series Door Closer.

        Photo by: Sargent ASSA-ABLOY

      • 1131 Series Door Closer:

        Fully adjustable for sizes 1 to 6, the 1131 Series door closer is ideal for use on aluminum storefronts and other medium traffic, commercial applications.


ELECTRIFIED ACCESSORIES


      • 3520 Power Supplies.

        Photo by: Sargent ASSA-ABLOY

      • 3520 Power Supplies:

        Used to provide necessary power requirements to all SARGENT electromechanical and access control locks. The 3520, 3540, 3550 and 3570 Series are 24VDC Regulated Power Supplies. These power supplies are recommended when using a SARGENT system.

      • 3521 Power Supplies.

        Photo by: Sargent ASSA-ABLOY

      • 3521 Power Supplies:

        Used to provide necessary power requirements to all SARGENT electromechanical and access control locks. The 3521, 3541, 3551 and 3571 are 12VDC Regulated Power Supplies. These power supplies are recommended when using a SARGENT System.

      • TMR2 Muti-Function.

        Photo by: Sargent ASSA-ABLOY

      • TMR2 Muti-Function:

        Allows the TMR2 muti-function delay for use with power supplies.

      • TMR9 Release Hold Timer.

        Photo by: Sargent ASSA-ABLOY

      • TMR9 Release Hold Timer:

        Allows the TMR9 release hold for use with power supplies.

      • Battery Pack 738.

        Photo by: Sargent ASSA-ABLOY

      • Battery Pack 738:

        24VDC 5AMP hour and 737 12VDC 5 AMP hour.

      • 4301 Card Reader.

        Photo by: Sargent ASSA-ABLOY

      • 4301 Card Reader:

        The 4301 Card Reader is a self-contained access control system offering a cost effective solution for commercial and industrial installations.

      • Remote Horn 4380H.

        Photo by: Sargent ASSA-ABLOY

      • Remote Horn 4380H:

        Single gang box mounted hord with 85 db at 15 ft piezo horn for signaling a remote location.

      • 4291/4292 Keypads.

        Photo by: Sargent ASSA-ABLOY

      • 4291/4292 Keypads:

        The 4290 Series microprocessor controlled (MPC) keypads provide keyless access, primarily for electric locking devices requiring a dry contact switch. User codes are programmed to perform various functions from keypad.

      • 4153/4253 Switch Locks.

        Photo by: Sargent ASSA-ABLOY

      • 4153/4253 Switch Locks:

        Provides authorized personnel with the ability to activate or de-activate an electrical product which requires a maintained switch. The switch is activated by turning the key 90� right or left (until stop is reached), then returning the key to the vertical position and removing. The key is removable in the vertical position only.

      • 4396H Wall & Frame Switch.

        Photo by: Sargent ASSA-ABLOY

      • 4396H Wall & Frame Switch:

        Wall switches are used to interface with door operators or other electromechanical hardware. Careful consideration should be given to the location of switches relative to their proximity to the door and the door�s direction of swing.

      • 3287 Door Status Switch.

        Photo by: Sargent ASSA-ABLOY

      • 3287 Door Status Switch:

        SPDT Switches in both concealed and surface mount packages- for reliable monitoring of your opening.

      • 4370/4379 Key Switches.

        Photo by: Sargent ASSA-ABLOY

      • 4370/4379 Key Switches:

        The 4370 Series cylinder key switch line adds versatility to electrical exit devices, electromechanical locks, electric strikes, and alarm bypass, allowing remote or local operation of each opening to be customized to the actual usage of the building.


EXIT DEVICES


      • HC Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • HC Rim Exit Device:

        SARGENT manufactures a fine line of exit devices providing the best combination of durability, simplicity, strength, aesthetics and innovation. The HC8800 device is designed for standard width stile applications on metal doors. The Hurricane Code Hardware has been accepted by Dade County, Florida. It meets the abuse and high wind loads required by South Florida building code. These exits are accepted and approved for use with CURRIES hollow metal doors and McKinney hinges.

      • 8500 Narrow Design Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 8500 Narrow Design Rim Exit Device:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. The 8500 Narrow Design Rim Exit Device is designed for narrow stile applications and features a rim bolt for quiet operation and security.

      • AD8500 Narrow Design Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • AD8500 Narrow Design Rim Exit Device:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. The AD8500 Narrow Design Rim Exit Device is designed for narrow stile applications and features a rim bolt for quiet operation and security.

      • 8800 Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 8800 Rim Exit Device:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. The 8800 series is designed for standard width stile applications on wood and metal doors. This reversible rim exit device sets the industry standard for durability and reliability.

      • 8888 Reversible Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 8888 Reversible Rim Exit Device:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. The 8888 is designed for standard width stile applications on wood and metal doors and has 7 functions determined by the trim function.

      • 8300 Mortise Lock Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 8300 Mortise Lock Exit Device:

        SARGENT manufactures a full line of exit devices that provide the best combination of strength, simplicity, aesthetics and innovation. The SARGENT 8300 Series Exit Device is a narrow design, push rail style, mortise lock exit device.

      • 8900 Mortise Lock Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 8900 Mortise Lock Exit Device:

        SARGENT manufactures a full line of exit devices that provide the best combination of simplicity, strength, durability, aesthetics and innovation. 8900 Mortise Lock Exit Device has concealed single point guarded latching for additional security and is designed for standard width stile applications on wood and metal doors.

      • WS8900 Mortise Lock Exit Device.

        Widstorm Product.

        Photo by: Sargent ASSA-ABLOY

      • WS8900 Mortise Lock Exit Device:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. Florida has the most demanding new codes for windstorm certified doors and SARGENT has the most stringent testing standards. The WS8900 is UL listed to ANSI 250.13 Severe Windstorm and listed on Florida Building Code website.

      • AD8600 & NB-AD8600 Concealed Vertical Rod Exit Device.

        For Aluminum Doors.

        Photo by: Sargent ASSA-ABLOY

      • AD8600 & NB-AD8600 Concealed Vertical Rod Exit Device:

        SARGENT manufactures a fine line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. The AD8600 & NB-AD8600 is designed for standard width single or double aluminum doors. The AD Series 8600 Concealed Rod Exit Device meets ANSI/BHMA Grade 1 standards.

      • AD8400 & NB-8400 Narrow Stile.

        Concealed Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • AD8400 & NB-8400 Narrow Stile Concealed Vertical Rod Exit Device:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. Designed for narrow stile aluminum doors, either hollow or extruded and meets ANSI/BHMA Grade 1 standards.

      • LS8600 Low Profile.

        Center-Top Latch Concealed Vertical Rods.

        Photo by: Sargent ASSA-ABLOY

      • LS8600 Low Profile Center-Top Latch Concealed Vertical Rods:

        SARGENT manufactures a fine line of exit devices providing the best combination of strength, durability, simplicity, aesthetics and innovation. The LS8600 has security of a stainless steel center bolt, concealed top bolt and a low profile device for single doors without the issues of a bottom rod.

      • MD8400 & NB-MD8400 Narrow Stile.

        Concealed Vertical Rod Exit Devices.

        Photo by: Sargent ASSA-ABLOY

      • MD8400 & NB-MD8400 Narrow Stile Concealed Vertical Rod Exit Devices:

        SARGENT manufactures a fine line of exit devices providing the best combination of simplicity, durability, strength, aesthetics and innovation. Designed for narrow stile applications, such as full glass doors and has concealed rods for security and aesthetics.

      • MD8600 & NB-MD8600 Concealed Vertical Rod.

        Exit Device for Metal Doors.

        Photo by: Sargent ASSA-ABLOY

      • MD8600 & NB-MD8600 Concealed Vertical Rod Exit Device for Metal Doors:

        SARGENT manufactures a fine line of exit devices providing the best combination of simplicity, durability, strength, aesthetics and innovation. The MD8600 is designed for standard width stile applications on hollow metal doors with concealed rods for security and aesthetics.(Windstorm Rated).

      • WD8600 & NB-WD8600 Concealed Vertical Rod.

        Exit Device for Wood Doors.

        Photo by: Sargent ASSA-ABLOY

      • WD8600 & NB-WD8600 Concealed Vertical Rod Exit Device for Wood Doors:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, durability, strength, aesthetics and innovation. The WD8600 is designed for standard width stile applications on wood doors with a concealed rod for additional security.

      • LP8600 & LR8600 Low Profile.

        Center-Top Latch Concealed Vertical Rod Exit Devices.

        Photo by: Sargent ASSA-ABLOY

      • LP8600 & LR8600 Low Profile Center-Top Latch Concealed Vertical Rod Exit Devices:

        SARGENT has developed a fine line of exit devices providing the best combination of strength, simplicity, durability, aesthetics and innovation. The security of a stainless steel center bolt, two concealed top bolts and a low profile device for pairs of doors without bottom rod issues.

      • HC4-8700 Surface Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • HC4-8700 Surface Vertical Rod Exit Device:

        The HC4-8700 Surface Vertical Rod exit device has been tested to withstand up to 150 psf and is listed in Florida Building Code for Hurricane-resistance.

      • 8700 Surface Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 8700 Surface Vertical Rod Exit Device:

        SARGENT manufactures a full line of exit devices that provide the best combination of simplicity, strength, durability, aesthetics and innovation. The SARGENT 8700 Surface Vertical Rod Exit Device has two point latching (top and bottom of the door) and is adjustable through the center case.

      • NB8700 Top Latch Surface Vertical Rod.

        Photo by: Sargent ASSA-ABLOY

      • NB8700 Top Latch Surface Vertical Rod:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. Surface Vertical Rod Less Bottom Rod Exit Device is for both rated and non-rated openings.

      • HC8700 Hurricane Code.

        Surface Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • HC8700 Hurricane Code Surface Vertical Rod Exit Device:

        SARGENT manufactures a fine line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. The Hurricane Code Hardware has been accepted by Dade County, Florida. It meets the abuse and high wind loads required by South Florida building code. These exits are accepted and approved for use with CURRIES hollow metal doors and McKinney hinges.

      • FM8700 Surface Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • FM8700 Surface Vertical Rod Exit Device:

        SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation. The SARGENT FM8700 is the only 2-point latching exit device that complies with FEMA P361 (2015) and requires no complicated, expensive door prep. Specially machined rail and internal components make the FM8700 sturdier and more robust than standard products.

      • 9400 Series Narrow Stile.

        Concealed Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 9400 Series Narrow Stile Concealed Vertical Rod Exit Device:

        The 9400 Series, narrow stile exit device has the classic cross bar look and is supplied with the 9400 Night Latch Cylinder Retainer (an 04 function and is the only function available with the 9400 series).

      • 9700 Series Surface Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 9700 Series Surface Vertical Rod Exit Device:

        Traditional looks while maintaining Life Safety/Fire code requirements for vertical rod applications, the 9700 Series exit devices are ordered with trim and shipped along with the strikes and key requirements in one carton. The cross bars are cut to the correct door width and vertical rods are made to order based on mounting position of the hardware and door height.

      • 9800 Series Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 9800 Series Rim Exit Device:

        For single door and pairs of doors, the 9800 series exit devices are ordered with trim and shipped along with the strikes and key requirements in one carton and the cross bars are cut to the correct door width.

      • 9898 Reversible Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 9898 Reversible Rim Exit Device:

        The 9898 Reversible Rim Exit Device can be used with one of four functions determined by the trim, which is sold separately. Cross bars can easily be cut to length in the field. There are 5 available trim designs which are non-handed.

      • 9900 Series Mortise Lock Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 9900 Series Mortise Lock Exit Device:

        SARGENT has designed a full line of exit devices offering a selection of both wide and narrow stile devices. The 9900 series exit devices are ordered with trim and shipped along with the strikes and key requirements in one carton. The cross bars are cut to the correct door width.

      • 3727 Series.

        Surface Vertical Rod Exit Device

        Photo by: Sargent ASSA-ABLOY

      • Series Surface Vertical Rod Exit Device:

        The 3727 is a rugged exit device in surface vertical rod and rim designs. The 3727 Non Configured SVR Exit Device is the perfect stocking device. It has 6 functions, 4 available trim designs and is easy to mix and match device and trim.

      • 3828 Series Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 3828 Series Rim Exit Device:

        The 3828 is a rugged exit device in a rim design. The 3828 Non Configured Rim Exit Device has 7 functions, 4 available trims and is easy to mix and match the device and trim.

      • 2727 Series Surface Vertical Rod Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 2727 Series Surface Vertical Rod Exit Device:

        The 2727 series is a rugged exit device with surface vertical rod and rim designs. It has 6 functions determined by configured trim and the chassis mounted unit construction assures easy installation and maintenance.

      • 2828 Non Configured Rim Exit Device.

        Photo by: Sargent ASSA-ABLOY

      • 2828 Non Configured Rim Exit Device:

        The 2828 Non Configured Rim Exit Device is the perfect stocking device. It has 7 functions determined by configured trim, easy to mix and match with device and trim sold separately and has 4 available trim designs.

      • 540 Series Exit Alarms.

        Photo by: Sargent ASSA-ABLOY

      • 540 Series Exit Alarms:

        SARGENT's line of exit alarms is designed to signal a violation when a door is used for unauthorized exit or passage. The 540 Series provides alarm indication with no locking function and the horn, once activated, will sound for two minutes, then shut off automatically and re-arm itself.

      • 550 Series Exit Alarms.

        Photo by: Sargent ASSA-ABLOY

      • 550 Series Exit Alarms:

        SARGENT's line of exit alarms is designed to signal a violation when a door is misused for authorized exit or passage. The 550 Series provides alarm indication with no locking function.

      • 5100 Series Alarmed Exit Lock.

        Photo by: Sargent ASSA-ABLOY

      • 5100 Series Alarmed Exit Lock:

        Sargent's line of exit alarms is designed to signal a violaton when a door is used for unauthorized exit or passage. The 5100 series combines the security of an alarm in a durable, secure package..

      • 5800 & 12-5800.

        Alarmed Exit Hardware

        Photo by: Sargent ASSA-ABLOY

      • 5800 & 12-5800 Alarmed Exit Hardware:

        SARGENT's 5800 Series Alarmed Exit Devices are designed for areas requiring a stand-alone alarm on outward swinging doors. This device has an integrated alarm to discourage the unauthorized use of emergency exit doors (the alarm sounds immediately up).


KEY SYSTEMS


      • Degree Key System.

        Photo by: Sargent ASSA-ABLOY

      • Degree Key System:

        The patented Degree system from SARGENT provides the right level of security for each opening in your facility with three levels of ANSI/BHMA Grade 1 protection, from patented keyway to UL437 certified.

        A common key for all three levels of security enhances key control and simplifies administrative procedures. Key blanks are controlled through authorized distribution and geographical protection is available.

        Available for mortise, rim, component and Large Format Interchangeable Core (LFIC) cylinders, SARGENT offers the right Degree of protection for every door in your facility.

      • Keso F1 Key System.

        Photo by: Sargent ASSA-ABLOY

      • Keso F1 Key System:

        The SARGENT Keso F1 Security System offers the building owner full control over field duplication of keys, highly pick resistant cylinders, expanded levels of master keying and a proprietary patented key system.

        With the Keso F1 cylinder, it is impossible to determine the configuration of the key system or its upper level master keys by examining the pinning configuration, providing the highest level of key system security available on the market today.

      • Signature Key System.

        ADD.

        Photo by: Sargent ASSA-ABLOY

      • Signature Key System:

        Extra security, exclusive end-user pattern, and protected key control are the main benefits of the Signature Series. The protected key design provides additional control over unauthorized key duplication, while the cylinder's unique design resists attempts at manipulation.

        The Signature feature is offered in the majority of Sargent keyways to provide a perfect solution to upgrading the level of control in an existing masterkey system.

      • XC Key System.

        Photo by: Sargent ASSA-ABLOY

      • XC Key System:

        The XC Series features specially designed, patent protected keys which operate XC Cylinders and Conventional cylinders in one key system. XC Series cylinders can be integrated into most existing SARGENT systems or as a new system.

        Multiple security levels are available to provide key control, convenience and service that meet the demands of each installation.

      • Keso Key System.

        Photo by: Sargent ASSA-ABLOY

      • Keso Key System:

        Keso provides an intermediate level of key control with a unique six-sided key design. The dimpled key requires sophisticated key-cutting equipment.

      • Conventional Cylinder System.

        Photo by: Sargent ASSA-ABLOY

      • Conventional Cylinder System:

        Limited Control: Cylinders and keys provide a minimal level of control in a full range of keyways. Geographically restricted key sections are available.

      • 6300 Series Removable Core System.

        Photo by: Sargent ASSA-ABLOY

      • 6300 Series Removable Core System:

        The 6300 Series Removable Core cylinders and construction cores allow quick change of keying without having to remove the lock from the door or dissamble the knob or lever.

        Cores are interchangeable with all SARGENT mortise locks, exit devices, cylindrical locks, padlocks and auxiliary locks.

      • 7300 Series Interchangeable Core System.

        Photo by: Sargent ASSA-ABLOY

      • 7300 Series Interchangeable Core System:

        The SARGENT version of ARROW, BEST and FALCON type interchangeable core is offered in two new SARGENT keyways and the BEST keyways. These cores are available in 6 and 7 pin keyways.


MORTISE LOCKS


      • 8200 Mortise Lock.

        Photo by: Sargent ASSA-ABLOY

      • 8200 Mortise Lock:

        When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry.

        SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

      • 8200 Electrified Mortise Lock.

        Photo by: Sargent ASSA-ABLOY

      • 8200 Electrified Mortise Lock:

        Featuring Ecoflex technology, SARGENT 8200 Electromechanical Mortise locks are designed to handle single opening, stand alone applications, or can be readily integrated into sophisticated access control systems.

        They meet ANSI/BHMA A 156.13 Grade 1 requirements, are UL listed on fire doors, and satisfy industry standards for operating temperature, shock and fire hazard.

      • 7900 Series Mortise Lock.

        Photo by: Sargent ASSA-ABLOY

      • 7900 Series Mortise Lock:

        The SARGENT 7900 Series Mortise Locks provide a quality Grade 1 lock ideal for schools, apartment housing and commercial buildings. Certified to ANSI/BHMA Grade 1 standards and UL fire-tested for all functions, the 7900 Mortise Lock ensures durability and protection.

      • M9200 Institutional Mortise Lock.

        With Mogul Cylinder.

        Photo by: Sargent ASSA-ABLOY

      • M9200 Institutional Mortise Lock with Mogul Cylinder:

        M9200 Institutional Mortise Lock with Mogul Cylinder. The M9200 Institutional Mortise Lockset is designed for use in detention facilities, holding areas and psychiatric facilities.

      • 9200 High Security Mortise Lockset.

        Photo by: Sargent ASSA-ABLOY

      • 9200 High Security Mortise Lockset:

        The 9200 High Security Mortise Lockset is designed for use on those openings subject to extreme abuse, vandalism, and malicious impact. It is well-suited for exposed perimeter doors in commercial facilities.

      • 7800 Mortise Knob Lock.

        Photo by: Sargent ASSA-ABLOY

      • 7800 Mortise Knob Locks:

        Heavy duty, BHMA certified under ANSI A156.13 Series 1000 Grade 1. UL listed for use on fire doors. UL listed to Canadian Safety Standards. Conforms to standards UL10C 'Positive Pressure fire tests of door assemblies' and UBC 7-2 (1997).

        SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

      • R8200 Mortise Lock with Roseless Trim.

        Decorative levers, Simpli Series.

        Photo by: Sargent ASSA-ABLOY

      • R8200 Mortise Lock with Roseless Trim:

        This elegant trim by SARGENT seamlessly unifies the lever and the door. Compatible with most Studio Collection and Coastal Series decorative levers, Simpli creates a flawless aesthetic vision on any door opening.

        Simpli is offered on the R8200 Series mortise lock, which was specially designed to accept the roseless trim. In addition to the R8200 Series, Simpli is also available with the RDL Series tubular locks and Harmony R8200 Series mortise locks.


MULTI-POINT LOCKS


      • FM7300 Series Multi-Point Lock.

        Photo by: Sargent ASSA-ABLOY

      • FM7300 Series Multi-Point Lock:

        The FM7300 Series helps secure community shelters and safe rooms by withstanding tornado wind speeds and flying debris. Available in multiple function and trim combinations, the FM7300 Series offers the flexibility needed to accommodate a full range of door opening solutions including electronic access control with the reliability and durability needed for extreme conditions.

        Its unique center case adjustability feature simplifies installation and device adjustment.

      • FM6100 Multi-Point.

        Auto Deadlocking Storm Shutter Lock.

        Photo by: Sargent ASSA-ABLOY

      • FM6100 Multi-Point Auto Deadlocking Storm Shutter Lock:

        SARGENT FM6100 is a multi-point auto deadlocking storm shutter system developed to help protect lives while securing a community shelter and safe room entry.

        Sturdy heavy-duty steel components firmly secure the storm shutter within the frame - at top, bottom and center latch points - securing the opening during a windstorm event.

      • 7000 Series Vertical Rod Lock.

        Photo by: Sargent ASSA-ABLOY

      • 7000 Series Vertical Rod Lock:

        The 7000 provides flexibility simplicity, strength, durability aesthetics and innovation and is perfect for a wide variety of applications including conference rooms, commercial office buildings, convention centers, upscale condominiums and residential applications, medical and educational institutions where exit devices are not required. Available for both metal and wood doors.


SPECIALTY LOCKS


      • 8200 Series Mortise Lock with BHW Trim.

        Photo by: Sargent ASSA-ABLOY

      • 8200 Series Mortise Lock with BHW Trim:

        Part of the Behavioral Health Series of products, the 8200 Series mortise lock with BHW trim provides an innovative solution for behavioral health environments. The unique integrated lever and escutcheon combines aesthetics with safety. Ease of operation, along with the strength and versatility of the 8200 Series mortise lock allows its use in many applications.

      • 8200 Mortise Lock with BHL Trim.

        Photo by: Sargent ASSA-ABLOY

      • 8200 Mortise Lock with BHL Trim:

        The SARGENT BHL trim is part of the Behavioral Health Series of products. With an array of functions, this trim can be used on virtually any opening in healthcare environments. Sloping surfaces and overlapping rose and lever address safety concerns common in behavioral health facilities.

        Perfect for tough environments, the BHL trim uses the SARGENT 8200 mortise lock,providing impressive strength and reliability.

      • 8200 Mortise Lock with Push/Pull Trim (ALP).

        Photo by: Sargent ASSA-ABLOY

      • 8200 Mortise Lock with Push/Pull Trim (ALP):

        You need it all: heavy-duty push/pull hardware that is flexible, easy to use and aesthetically pleasing. The SARGENT 8200 mortise lock with push/pull trim provides all that and more.

        Appropriate for behavioral healthcare settings and beautiful enough for healing environments, this trim offers multiple mounting options and easy operation, even when your hands aren�t free. So when the building requirements are tough, push back with SARGENT.

      • HP Bored with Push/Pull Trim (ALP).

        Photo by: Sargent ASSA-ABLOY

      • HP Bored with Push/Pull Trim (ALP):

        The HP Series Bored Lock with ALP push/pull trim provides an aesthetically-pleasing alternative to standard push/pull products.

        Ease of operation allows its use in many environments, including healthcare and education. The paddle shape and location create a comfortable target for door activation without using hands.

      • 7800 Mortise Lock with Push/Pull Trim (PT).

        Photo by: Sargent ASSA-ABLOY

      • 7800 Mortise Lock with Push/Pull Trim (PT):

        The Push/Pull design commonly known for its ease of operation is coupled with the strength and integrity of a mortise lock to provide greater versatility.

        The PT 7800 is perfect for facilities that require more durability and security features than that of a cylindrical lock.

      • 114/115 Hospital Latches for Push-Pull Doors.

        Photo by: Sargent ASSA-ABLOY

      • 114/115 Hospital Latches for Push-Pull Doors:

        Designed for convenience plus utility, the 114/115 hospital latches open with a gentle pull or slight push, making it ideal for hands free operation. The 114 push-pull latch with its profile makes it very easy to operate, while the 115 push-pull latch with its lower profile helps eliminate any obstruction while passing through an opening.

        Slim tapered paddles and smartly styled escutcheons possess all the elements of tasteful, yet functional design.

Aiello's Locksmiths of Atlanta (404) 456-3817 - Stock Pictures Locksmith Photo Image Gallery